Wednesday, 9 December 2009

(Group Project) Week 8 - Final Video Editing/Exporting and Presentation (also Project Reflection)

As this is the final week, I knew that all the effort the whole group had put in to get ahead of schedule paid off - we only needed small pieces of the project leftover to render, edit and finally export

As Aaron was sorting out the details on the group posting and preparing the 'Powerpoint' slides to present with on Thursday 10th, Richard and I decided to work together to get the exported AVI's produced last week into Premiere and Sonar - this wasn't easy as I knew that the programs will try and reduce not only video resolution, but compress down the audio within the mix/mastering stage when exporting back out again...





After a discussion between group members as how to go about bringing together the three camera-targeted renders( along with the narration and my sourced audio effects), we decided on this order for the final production of the educational video:

1. - Use single-frame renders of the completed model (now within the finished environment) as backing images for when the narrative is running (we may also source some of the original 'coke works' image we found when researching during the opening weeks!)

2. -These will then lead onto the camera view which pans all around the model as it is operating, then dissolving into the static camera filming the pump in motion, and then onto the camera which pans around the whole building (highlighting the attention to detail; lighting, modelling and textures)

The image above shows the process of importing and dragging various JPEG, AVI and WAV files onto Premiere's timeline to get the right combination of timing and effectiveness with audio and video



With the AVI exported out of Premiere, it was then a case of importing it into Sonar (I knew that as we were using the 'Producer' edition, it was possible to import video as a track which could then be displayed as 'static thumbnails' along the timeline under the toolbar)

Using the video thumbnails as a guide, Richard and I could place the audio that would be audible during the camera pan around the model; the blue-tinted audio clip ("lab-machine") is the constant 'chugging' and the pistons and con-rods moving back and forth, the upper green-tinted audio clip ("rewired-steam") is the pressure releasing through the blow-off valves situated around the casing of the pump itself - the narrative clip is visible as the lower green-tinted audio clip

The file was then exported as a 'DV-PAL' AVI, totaling 400MB in size - this was a relief, as not only Rich and I, but the group collectively were worried that we may have needed to use a DVD to store all out files to be handed in on

Now that we had the Post-Production in the bag, it was a case of prepararing the finishing touches to the 'Powerpoint' presentation; we would be describing the groups progression from when we first made the choice of machinery to model, role aquisition and then gradual modelling, texturing and animation, along with all the areas in between...

On Reflection (of the Project)

To be in a group and to involved with a project with all members willing to pull their creative weight meant that the whole experience has been throughly enjoyable. I knew that by deciding on roles within the first week, everyone's focus to be concentrated without the need to ask each other consistently "what point are you at?"

To assess who was suitable  for what roles (as well as listening to each other's opinions) , a SWOT analysis was drawn up - from here I saw that I would be best suited to the exact areas I wanted: modelling, texturing and post-production.
The visit to the Museum was enlightening - a selection of steam-powered machines presented themselves for our choosing, but once we'd chosen the Reliable Steam Pump , I felt the group's confidence in our abilities (we had a long conversation about designing various areas of it on the way home from the Museum!) would improve over the coming weeks

The timescale at which each section was coming together brought a feeling of control and organization to the first Two weeks - we unfortunately failed to meet our own pre-set deadline to progress onto texturing by Week three, which wasn't as disrupting as I'd expected (besides, the group was able to merge our files at almost any time as  all but one of us were of such close proximity outside of campus) and by the group post  of week Three, we showed around 60 % completion of the overall modelling

Contact was maintained continously and thus enabled us to all keep each other updated through means of emailing one another our individual progression with our relevant parts, as well as marking this apparent within our group and individual blogs. By weeks Five and Six, I was well underway with creating, modifying and applying textures; many created in Photoshop, a few downloaded and sourced from 'Texture Packs', as highlighted in previous posts. It was in week Five that there was an Interim Presentation, in which we could present our progress and generally describe our processes to get to this stage. I felt this was a successful update and gave extra enthusiasm to the group's ideas over the closing few weeks

My personal highlights of the project include;

1 - The Modelling of my Pump section was accurate, I feel, to the reference images we took at the Museum and contained many examples of techniques learned over the period I have used Autodesk 3DS Max
2 - Using a book given to me by my lecturer which contained the means to create a hydraulic-weave 'braided hose texture' and it turning out as well as I'd hoped, with the group also very pleased with its appearance and final application (this process is covered in a previous post)
3 - Creating the storyboards by which the group could follow the initial ideas of mapping out the order at which the cameras and general audio/visual imagery would play out and  create the final sequence  
4 - The Post Production; my preferential area of interest, I wanted to make sure that the narrative and resulting sounds associated fitted well with the overall feel and intention of the group's design ideas and this was most certianly fufilled.
                 
            
Not much would be different should the group start the project over again, but I suppose there would always areas in which the modelling, texturing and animation would be tweaked and altered to improve 'realism' or to appease the group's overall satisfaction of our work; overall though, I feel the group has maintained a high standard throughout and we presented the final piece with the knowledge that it was the very best that we could have created and procdued in the time-scale we had!              
                         

Saturday, 5 December 2009

(Group Project) Week 7 - Merging of Completed Sections & Post Production

As a side note - I hadn't given the steps I used when creating and applying the dial-detail last week (as there was already so much I'd included!), so here they are before I describe the rest of the weeks progression...

Dial-Detail Texture Creation and Application



 I imported the reference photo into Photoshop and immediately used the 'Distortion Filter_Lens Correction', which corrected the 'perspective' angle of the original shot
I then used the 'Elliptical Marque' tool and held down SHIFT so that I would get a circular (rather than elliptical) marque; it was then a case of targeting the inner area of the dial, selecting the 'Layer By Cut' option, and then reducing the opacity in the 'background layer' to generate the image shown here (the background layer is now easily hidden by unchecking the 'iris' icon next to the layer name





By using a combination of the 'Patch Healing' and 'Target Dodge' tools, I could remove the needles (as only my modelled one should be visible on-screen) bit-by-bit, and filling in the overall texture as I went; marking the black BAR 'markers' all around the dial and generally making the dial-detail seem like it hadn't been 'Photoshopped' at all!



After importing the completed PNG file into my 'Material Library', I could then select the Polygons I wanted from the inner-face of the dial and dragging the texture onto it. As I'd saved the file as a PNG, Photoshop has generated a pixellated border around the dial's circular form, so I needed to tile the texture so that this would be hidden from sight
I didn't want to go over-the-top with complex shaders for this texture, purely because of the intention to justify the age of the whole model, with only a visible resotration perhaps to the outer casing of the gauge itself (the polished steel texture needs to look authentic in the series of lighting objects we will be intergrating into the final production...)


Lighting Test

Before I put my modelled section into the final scene, I wanted to test some lighting scenarios so I knew that the Shader Parameters and Specular Maps that are on many of the materials used wouldn't 'bloom' or 'burn-out' when exposed to the intense lighting conditions needed inside our 'workshop' scene to show all details we have all spent so long modelling (it'd be a real shame to see even the seemingly most insignificant piece be lost in shadow!)  *These renders are all using Omni lights*



This render is one that has been intentionally over-lit, with the 'Intensity' multiplier at 1.4, near and far attentuation within a small range, a 'falloff' projector map and the 'affect surfaces' details set at: Contrast-67, soften diffuse edge-80
This is render with settings that would certainly become far too severe in the lighting parameters that the group will choose for the produced model







This render is one that has been intentionally under-exposed, with the 'Intensity' multiplier at 0.4, near and far attentuation within a small range, no projector map and the 'affect surfaces' details set at: Contrast-30, soften diffuse edge-100. I have also enabled  'Shadow Parameters', with a Shadow Density of 1.25 in solid black

This is render with settings that would certainly become far too enclosed in shadow in the lighting parameters that the group will choose for the produced model


This is a render that is an accurate and even combination of the two examples given above, with the 'Intensity' multiplier at 0.8, near and far attentuation within a small range, a 'falloff' projector map and the 'affect surfaces' details set at: Contrast-25, soften diffuse edge-100 (diffuse/specular checked). I have also enabled  'Shadow Parameters', with a Shadow Density of 1.00 and the addition of 'Atmosphere Shadows' with Opacity at 0.75 and Colour Amount at 100 improve the model too
This is render with settings that would certainly become far too enclosed in shadow in the lighting parameters that the group will choose for the produced model

Doing this enabled me to see how well my section would react to the lighting situations in the post-production stage of the project - my other group members will surely follow this method to test their relevant sections to further improve accuracy as a whole

Narration w/ Ambient Sound Editing (Sonar)






Once Stuart had recorded his narration that details a brief history of the pump and other  important facts and figures, I was then tasked to create the complete WAV track with ambient samples to accompany the vocals

The Sonar file is a total of four tracks; one is the narrative. This was applied with a Parametric EQ FX. The EQ was adjusted so that, while Stuarts voice was already strong in the mid-band, I felt needed more prescence in the lower octaves. All that was needed was to then eliminate all pauses and exhalations at the end of each of the four 'Split' samples

The other three tracks are ambient 'mechanised' sounds; two have been lowered in gain and the other sample have been placed in random points during the narration. These ambient sounds are intended to convey a sense that Stuart is giving this narrative from an office above the workshop below, enhancing the authenticity of the recording as it is presented as part of the final production to the general public

The Sonar Project file was then exported, as shown in the image here, as a CD-quality WAV file with a 44.1Khz Sample Rate and 16bit Bit Rate - this will be integrated into Final Cut when the final camera-based animation is rendered at the start of next week...


Next week: the group will be adding the finishing touches to the Post Production and preparing a Powerpoint Presentation for Thursday 10th December